Hello, Guest!
Login
SHOPPING CART: (0) ITEMS
Home
About Us
FAQ
Find Your Part Number
My Account
Home
>
Hypertherm Plasma Cutting Machines & Consumables
>
Powermax45 XP
> Hypertherm 420633 FlushCut Nozzle/Shield Assembly
Hypertherm 420633 FlushCut Nozzle/Shield Assembly
Hypertherm 420633 FlushCut Nozzle/Shield Assembly
0 Review(s)
0
0
5
|
Questions about this item? Be the first to ask here.
Price
Your Price:
$59.59
Part Number:
420633
Quantity
Add to Cart
Be the first to review this item
Add to Wish List
Email this page to a friend
Description
Customer Reviews
Benefits
FlushCut Consumables for Powermax Systems
Cut closer...grind less
Close cutting applications such as lug and attachment removal are typically done using oxyfuel, carbon arc gouging, or traditional plasma cutting tools. New flush cutting capabilities of Powermax® plasma systems now offer a more efficient process for these operations.
Patented FlushCut™ consumables have been specifically designed to allow Powermax users to cut attachments, lugs, pad eyes and other positive features as close to the base as possible without piercing or damaging the workpiece. An angled nozzle bore design and flat guiding shield enables flush cutting that leaves less than 5mm (3/16”) residual material on the base or work piece, reducing grinding and secondary repair operations.
Consumables are compatible with both mechanized and handheld applications with the:
Powermax45 XP
Powermax65
Powermax85
Note: Not compatible with the Duramax retrofit torches
Maximum productivity
Heat affected zone (HAZ) associated with flush cutting is approximately ten times less than that of oxyfuel allowing you to cut closer to the bae material
Less overall pre-processing time (e.g. no gas setting, purging or preheating) than oxyfuel
Remove lugs and attachments in a single pass compared to carbon arc gouging which requires multiple passes and additional time
Advantages vs. traditional plasma consumables
The angled nozzle bore of FlushCut consumables reduces secondary grinding by leaving minimal residual material
The 45 degree angle of the FlushCut arc allows for lugs and attachments to be removed with a flat bottom, increasing the chances for the lug or attachment to be reused
The guiding flat on the shield helps operators avoid digging into the base plate, reducing the need for costly repair
Browse Similar Items
Hypertherm Plasma Cutting Machines & Consumables
>
Powermax45 XP
>
Consumables
Quick View