Hypertherm Powermax 125 Machine System 059542. Note, adult signature required upon delivery.

0 Review(s) Write a Review

$9,900.00

Questions about this item? Be the first to ask here.

Part Number: 059542

Quantity

Description
Product Features

Powermax105 Brochure

Powermax Selection Guide

NEW! Powermax105

With the maximum power and performance for air plasma in our line, the Powermax105 delivers superior cut capabilities on 1-1/4" (32 mm) thick metals. It has the duty cycle and reliability for the most demanding cutting and gouging jobs. Seven Duramax torch styles provide greater versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging. Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or the workpiece.

Powermax105 Cut Capacity

Maximum productivity

Fast cut speeds: three times faster than oxyfuel on 12 mm (½") mild steel.
Superior cut and gouge quality means less time spent on grinding and edge preparation.

Easy-to-use for cutting and gouging

Smart Sense™ technology automatically sets correct air pressure based on torch length and operating mode.
Handheld, straight machine and robotic torches for greater versatility and ease-of-use.
Wide voltage tolerance improves performance on motor generators and in low-line conditions.
Improved shield reduces dross buildup and enables smoother drag cutting for a better cut.

Built and tested to withstand the harshest conditions

Duramax™ torches are designed for high impact and heat-resistance.
SpringStart™ technology ensures consistent starting and a more reliable torch.
Low maintenance for maximum uptime – it keeps on going.

Low operating cost

Long consumable life for lower cost and more uptime.
Exclusive electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
High power efficiency lowers energy consumption.

*Note: The CPC port is also known as a "Circular Plastic Connector." It is a standard 14 pin amp. plug (female)

Specifications

Input Voltages	CSA CE CE CCC	200 – 600 V, 3-PH, 50/60 Hz 230 – 400 V, 3-PH, 50/60 Hz 400 V, 3-PH, 50/60 Hz 380 V, 3-PH, 50/60 Hz
Input Current @16.8 kW	CSA CE CE CCC	200/208/240/480/600 V, 3-PH, 58/56/49/25/22 A 230/400 V, 3-PH, 50/29 A 400 V, 3-PH, 28 A 380 V, 3-PH, 30 A
Output current		30 - 105 A
Rated output voltage		160 VDC
Duty cycle @ 40°C (104°F)	CSA CE CE CCC	200-600 V 70% @ 105 A, 240 V, 3-PH 80% @ 105 A, 480 – 600 V, 3-PH 100% @ 94 A, 480 – 600 V, 3-PH 100% @ 88 A, 240 V, 3-PH 230-400 V 70% @ 105 A, 230 V, 3-PH 80% @ 105 A, 400 V, 3-PH 100% @ 94 A, 400 V, 3-PH 100% @ 88 A, 230 V, 3-PH 400 V80% @ 105 A, 400 V, 3-PH 100% @ 94 A, 400 V, 3-PH 380 V80% @ 105 A, 380 V, 3-PH 100% @ 94 A, 380 V, 3-PH
Open circuit voltage (OCV)	CSA CE	(200 – 600 V) 300 VDC, CE (230 – 400 V) 288 VDC (400 V) 292 VDC, CCC (380 V) 280 VDC
Dimensions with handles		592 mm (23.3") D; 274 mm (10.8") W; 508 mm (20.0") H
Weight with 7.6 m (25') torch	CSA CE CE CCC	45 kg (100 lbs) 45 kg (100 lbs) (230 – 400V) 41 kg (91 lbs) (400 V) 41 kg (91 lbs)
Gas Supply		Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure	Cutting: 217 l/min (460 scfh, 7.7 scfm) @5.9 bar (85 psi) Gouging: 227 l/min (480 scfh, 8.0 scfm) @4.8 bar (70 psi)
Input power cable length		3 m (10' )
Power supply type		Inverter - IGBT

* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.