
Specifications
Input Voltages | CSA 200 – 480 V, 1-PH, 50/60 Hz 200 – 600 V, 3-PH, 50/60 Hz CE 400 V, 3-PH, 50/60 Hz |
---|---|
Input Current @ 9 kW | CSA 200/208/240/480 V, 1-PH, 52/50/44/22 A 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A CE 380/400 V, 3-PH, 15.5/15 A |
Output current | 20 – 65 A |
Rated output voltage | 139 VDC |
Duty cycle @ 40 °C (104 °F) | CSA 50% @ 65 A, 230 – 600 V, 1/3-PH 40% @ 65 A, 200 – 208 V, 1/3-PH 100% @ 46 A, 230 – 600 V, 1/3-PH CE 50% @ 65 A, 380/400 V, 3-PH 100% @ 46 A, 380/400 V, 3-PH |
Open circuit voltage (OCV) | CSA 295 VDC CE 275 VDC |
Dimensions with handles | 19.7" (500 mm) D; 9.2" (234 mm) W; 17.9" (455 mm) H |
Weight with 25' (6.1 m) torch | CSA 64 lbs (29 kg) CE 57 lbs (26 kg) |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate/pressure | Cutting:400 scfh; 6.7 scfm (189 l/min) @ 85 psi (5.6 bar) Gouging: 450 scfh; 7.5 scfm (212 l/min) @ 70 psi (4.8 bar) |
Input power cable length | 10' (3 m) |
Power supply type | Inverter – IGBT |
Engine-driven Generator
Engine Drive Rating (kW) | System Output (amps) | Performance (arc stretch) |
---|---|---|
15 | 65 | Full |
12 | 65 | Limited |
12 | 40 | Full |
8 | 40 | Limited |
8 | 30 | Full |
Operating Data
Handheld Cut Capacity | Thickness | Cut speed |
---|---|---|
Recommended | 3/4" (19 mm) | 20 ipm (500 mm/min) |
1" (25 mm) | 10 ipm (250 mm/min) | |
Severance | 1-1/4" (32 mm) | 5 ipm (125 mm/min) |
Pierce | 5/8" (16 mm) * | |
* Pierce rating for handheld use or with automatic torch height control. |
Metal Removal Rate
Gouge capacity | 10.7 lbs. (4.8 kg) per hour |
---|---|
Groove profile | .14" (3.5 mm) D x .26" (6.6 mm) W |
Cut Chart
Material | Thickness | Current (amps) | Max Cut Speed* | ||
---|---|---|---|---|---|
in | mm | ipm | mm/min | ||
Mild Steel | 10 GA 1/4 1/2 3/4 1 | 3 6 12 19 25 | 45 65 65 65 65 | 205 145 50 24 13 | 5000 3900 1430 610 350 |
Stainless Steel | 10 GA 1/4 1/2 3/4 | 3 6 12 19 25 | 45 65 65 65 | 168 120 40 19 | 4200 3800 1150 490 |
Aluminum | 1/4 1/2 3/4 | 6 12 19 | 65 65 65 | 190 60 30 | 5500 1660 770 |
* Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
