Specifications
| Input Voltages | CSA:115/230 V, 1 PH, 60 Hz |
|---|---|
| Input Current @ 2.25 kW | 115/230 V, 1 PH: 33/18 Amp |
| Output Voltage | 90 VDC |
| Output Current | Adjustable, 16 – 25 Amps |
| Duty Cycle | 35% @ 27 Amps, 40 °C (104 °F) |
| Maximum OCV | 255 VDC |
| Dimensions | 15.75" (400 mm) D; 8.5" (216 mm) W; 12" (305 mm) H |
| Weight with Torch | 47 lbs (21 kg) |
| Gas Supply | Clean, dry, oil-free air |
| Flow Rate | 270 scfh; 4.5 cfm (129 l/min) |
| Flow Pressure | 60 psi (4.1 bar) |
Cutting Specifications
| Recommended Capacity | 1/4" (6 mm) |
| Maximum Capacity | 3/8" (10 mm) |
| Severance Capacity | 1/2" (12 mm) |
Cut Chart
| Material | Thickness | Current (amps) | Approximate Travel Speed* | ||
|---|---|---|---|---|---|
| inches | mm | ipm | mm/min | ||
| Mild Steel | 18 GA 12 GA 1/8 3/16 1/4 3/8 | 1.3 2.8 3.6 4.8 6.0 10.0 | 27 27 27 25 25 25 | 160 52 25 33 17 9 | 1775 1320 1190 825 430 225 |
| Aluminum | 18 GA 12 GA 1/8 3/16 1/4 3/8 | 1.3 2.8 3.6 4.8 6.0 10.0 | 25 25 25 25 25 25 | 81 55 44 29 9 5 | 2055 1395 1115 735 225 125 |
| Stainless Steel | 18 GA 12 GA 1/8 3/16 1/4 3/8 | 1.3 2.8 3.6 4.8 6.0 10.0 | 25 25 25 25 25 25 | 65 48 41 27 14 7 | 1650 1215 1040 685 355 175 |
* Approximate travel speeds from Hypertherm laboratory testing. Actual speeds may vary based on application. Refer to the operator manual for details.
