
Specifications
Input Voltages | CSA115/230 V, 1 PH, 60 Hz |
---|---|
Input Current @ 2.43 kW | 115/230 V, 1 PH: 28/14 Amp |
Output Voltage | 92 VDC |
Output Current | Adjustable, 14 – 27 Amps |
Duty Cycle | 35% @ 27 Amps, 40 °C (104 °F) |
Maximum OCV | 288 VDC |
Dimensions | 16" D; 8.5" W; 12" H |
Weight with Torch | 55 lbs (25 kg) |
Gas Supply | Clean, dry, oil-free air |
Flow Rate | 270 scfh; 4.5 cfm (129 l/min) |
Flow Pressure | 60 psi (4.1 bar) |
Cutting Specifications
Recommended Capacity | 1/4" (6 mm) |
Maximum Capacity | 3/8" (10 mm) |
Severance Capacity | 1/2" (12 mm) |
Cut Chart
Material | Thickness | Current (amps) | Approximate Travel Speed* | ||
---|---|---|---|---|---|
inches | mm | ipm | mm/min | ||
Mild Steel | 18 GA 10 GA 3/16 1/4 3/8 | 1.3 3.4 4.8 6.4 9.5 | 27 27 27 27 27 | 160 57 33 18 12 | 4060 1460 825 465 325 |
Aluminum | 18 GA 10 GA 3/16 1/4 3/8 | 1.3 3.4 4.8 6.4 9.5 | 27 27 27 27 27 | 192 51 29 13 8 | 4875 1300 735 345 200 |
Stainless Steel | 18 GA 10 GA 3/16 1/4 3/8 | 1.3 3.4 4.8 6.4 9.5 | 27 27 27 27 27 | 156 45 27 16 8 | 3960 1150 685 400 220 |
* Approximate travel speeds from Hypertherm laboratory testing. Actual speeds may vary based on application. Refer to the operator manual for details.
